500W grid tie inverter, solar on grid tie inverter 500W, inverter 12V to 110V 120V 220V pure sine wave
- Unit Type: piece
- Package Weight: 2.3kg (5.07lb.)
- Package Size: 25cm x 18cm x 12cm (9.84in x 7.09in x 4.72in)
500W grid tie inverter, solar on grid tie inverter 500W,
inverter 12V to 110V 120V 220V pure sine wave
factory solar on grid tie inverter price, professional inverter manufacturer
1.500W Solar Inverter On Grid
2.Directly connect with solar panel
3.Pure sine wave output inverter
* directly connected to the solar panels (do not connect the battery)
MPPT using precise function, APL functions, solar panels automatically adjust to maximum output power, simply connect
directly to the solar panel grid inverters, do not need to connect the battery.
* AC 0 angle with high precision auto-detection
AC phase angle of 0 through isolation amplifier and input to the MCU for high-precision detection and analysis, the phase
shift rate of only
* Synchronous High-frequency Modulation
In the course of the grid, usually with the same phase angle and the net (ie, two-phase alternating current total is equal to 0,
with the switch to the two AC fusion) and the product is first rectified AC half-frequency AC to 100Hz, Then the machine
produces high frequency current in the circuit and semi-100Hz frequency alternating current generated combination, to achieve
* Pure Sine Wave Output
Adopt SPWM to make pure sine wave output directly.
* Power Automatically Locked (APL)
The current strength of the different fluctuations, we should use the MPPT function, when the MPPT function adjusted to the
maximum power point, the product automatically powers locked in maximum power point, the output power is more stable.
* Maximum Power Point Tracking (MPPT)
Current intensity, voltage constantly changes, if there is no power point tracking, then there will be a lot of problems in the past
usually adopted a solar controller, this product uses high-precision MPPT computing power, automatic and immediate to solar
panels output power adjustment in the maximum output point, in order to achieve a stable output purposes
* Automatically Adapt To Different Load Power Factor
Adapt to any of the power load.
* Automatically Shut Down When The Power Output Of a Fault
When the city power system planning power outage there is a failure, the inverter will automatically turn off the output.
* Current Limit Protection
This product is constant current, constant output power, without any overload, over-current phenomenon.
* Stack Multiple Machines (in the parallel machine used)
Multiple machines in parallel can be used to achieve a small power inverter in parallel for the power output.
* High-Frequency High Conversion Rate
Use high-frequency converter to make high efficiency.
* 6-grade power search
In overcast weather,the solar battery’s output current is extremely tiny, then inverter will automatic open 6-grade power
1. The program can automatically open power adjustment for 6 times.
2, The current direction can adjust from the maximum to the minimum.
3. In automatic adjustment process, we will see the LOW light flashing. And the power will keep as a starting point, from 0 to
output power, and it will restart at most for 6 times, then locked in the maximum power, the ST lamp long bright.
4. It need 10 minutes for 6-grade power search.
In order to achieve higher power use requirements, this product can be stacked, such as: 4 grid inverter1000W stacking can
achieve 4000W.And the number of the stacking is unlimited. Used as shown
1. Solar Panel: Recommend using the power more than 30W and the standard voltage of 17.5V PV panels.
Recommend using multiple solar panels. Solar panel in series will result in high-input voltage which will exceed the working voltage range of the inverter.
2. AC output:
* Voltage range of the inverter whose output is 230V AC.: 180V - 260V
* Voltage range of the inverter whose output is 110V AC.: 90V - 140V
1.Low-voltage protection (input DC voltage is less than 10.5VDC).
2.Over-voltage protection (Input DC voltage is greater than 28VDC).
3.Over-temperature protection (when the chassis temperature is above 75°C,
the temperature dropped about 2-10 minutes to restart automatically after cooling).
4.Fault Protection (when 110VAC or 230VAC power outage or shutdown).
5.Islanding protection: When the electric supply stop, the inverter automatically shut down output.
1.Green LED flashing: The inverter is adjusting power output. MPPT is in working condition.
2.Green LED long in time: The inverter is in working condition with the maximum output power.
MPPT controller inverter on grid tie 500W inverter solar Grid-series models 500W Recommend use solar panels 620Wp DC Maximum Input Power 600W DC maximum voltage VpvDC30.2VDC DC voltage range Vpv 10.5V~28VDC Maximum output power factor 99% Maximum input current 30A AC output power 500W AC maximum output power 500W Anti-voltage protection Fuse AC standard voltage range 90V-140/180~260VAC AC frequency range 55Hz~63Hz/ 45Hz-53Hz Output current total armonic distortion THDIAC Phase Islanding protection VAC;f AC Output short circuit protection Current-limiting Status Show LED Light Standby Power Night Power Ambient temperature range -25 °C~60°C Humidity 0~99%(Indoor Type Design) Waterproof Indoor Type Design Electromagnetic Compatibility EN50081.part1 EN50082.part1 Power System Disturbance EN61000-3-2 EN60950-1 Network test DIN VDE 1026 Net weight 1.5kg G weight 2.3kg Size (L x W x H) 21 x 16 x5.3cm Package (L x W x H) Inner box:30x21x12CM Big box:43x32x28CM Installation Wall hanging AC power cord length 1.8m Cooling Cooling Fan Show 1 Red and 1 Green LED
- Output Type: Single
- is_customized: Yes
- Type: DC/AC Inverters
- Size: 21*16.5*5.3 cm
- Input Voltage: 10.5-30V DC
- Output Voltage: 90-130V/190-260V AC
- Output Frequency: 46Hz ~ 65Hz
- Weight: 1.3kg
- Model Number: TEG-500W
- Output Power: 0-500W
Tags: tie inverter, 500w grid tie inverter, grid tie inverter 500w, Cheap tie inverter, High Quality 500w grid tie inverter, China grid tie inverter 500w Suppliers.